Merchandise Description

JUKI CZPT placement device PCBA assembly CONVEYOR PULLEY B ASM E2 0571 210A0

Item Description

Welcome to seek the advice of.

In depth Images

Other CZPT elements:
40046619 MOUSE HINGE
40046625 Swap PANEL R PRINT FIG
40046628 ROLLER XIHU (WEST LAKE) DIS. R
40046631 Z SLIDE BRACKET A
40046632 NOZZLE OUTER
40046637 MOUSE POCKET
40046642 MAGNETIC SCALE WIPER
40046643 CG2 GREASE
40046644 ZM RUBBER
40046646 FILTER
40046647 JIG NOZZLE LNC JIG
40046648 CZPT OFFSET Boss(70)
40046649 CZPT OFFSET Boss(80)
405710 T3.5 JIG SPACER JIG
405711 T16.5 JIG SPACER JIG
40046680 COPLANARITY Device ASM
4057108 LINEAR_XIHU (WEST LAKE) DIS._Y
4057109 CABLE BEAR Y
4057150 LINEAR_XIHU (WEST LAKE) DIS._X
4057173 ATC_LABEL
4057186 CABLE BEAR X
4057196 CB_Support_B_S
LNC HEAD ASM Fx-three
OCC_LENS_ASSY
OCC_Mild_ASSY
HMS_ASSY
OCC_ASSY
SOLENOID_VALVE
OCC_LENS_BRACKET
MANIFOLD_VALVE_A_ASM
PWB_XIHU (WEST LAKE) DIS. S-A
PWB_XIHU (WEST LAKE) DIS. S-B
PWB_XIHU (WEST LAKE) DIS._PLATE_S-A
PWB_XIHU (WEST LAKE) DIS._PLATE_S-B
PWB_XIHU (WEST LAKE) DIS._J
JOINT_PULLEY_BELT
PWB_Internal_A
PWB_Interior_B
PWB_XIHU (WEST LAKE) DIS._IN-OUT
CONVEYOR_BELT_S
CONVEYOR BELT J
CONVEYOR BELT IN/OUT
CONVEYOR_BELT_IN/OUT-W
Push_PULLEY
STOPPER_CHIP_B
RAIL_STAND_PLATE
4057160 XY_DRIVER_Device
4057164 VACUUM_PUMP_ASSY
4057179 Power_SUPPRY_ASSY
4057183 CTRL_BOX_ASSY
4057136 XY DRV Device (EN) ASM
4057138 Basic safety Unit Human body ASSY
4057139 Electrical power SUPPRY ASSY L(EN)
4057140 Energy SUPPRY ASSY R(EN)
4057160 Cover_RB_C
4057170 Liquid crystal display_BRACKET_F
4057171 Lcd_BRACKET_R
4057181 Cover_SB_R
4057182 Protect_SB_A
4057184 Go over_SB_B
4057194 Cover_FB_B
457109 Gas SPRING
457116 Protect_SB_L
457144 LOCK_SHAFT(HSM)
457145 Fixing_PLATE(HSM)
457149 DRIVER_BRACKET
457153 UP_SENSOR_Continue to be
457154 Generate_CYLINDER(FX3)_ASM
457172 TAPE_XIHU (WEST LAKE) DIS.
457173 FS_PLATE
457174 ROLLER_XIHU (WEST LAKE) DIS.
457177 ROLLER_XIHU (WEST LAKE) DIS._LL
4057109 SOLENOIDO_GIRD
4057125 HEAD_Leading_Go over_R
4057126 HEAD_Top_Cover_R
4057129 CB_Assist_SHEET_T
4057134 XM_Base_B
4057157 HTP_POLE_A
4057192 Y_Resolve_STOPPER
4057189 CZPT SW(F) ASM
4057194 F-KEYBOARD CABLE ASM
4057199 ETHER CONVERSION CABLE ASM
4057100 XY BEAR CABLE D ASM
4057102 ETHER-Major PCB ASM
4057104 ETHER-SLAVE PCB ASM
4057106 HEAD-Main PCB ASM
4057108 OCC A Mild PCB ASM
4057112 OCC C Light-weight PCB ASM
4057114 XY-RELAY PCB ASM
4057118 Base-Have PCB ASM
4057120 Procedure PCB Front ASM
4057122 Electrical power PCB ASM
4057124 ZT Power PCB ASM

Packaging & Shipping and delivery

We use picket situation packaging, vacuum packaging, carton packaging and other mixtures
ensure that the merchandise will not be damaged in the course of transportation.

Business Profile

ZheZheJiang nling Industrial Co., Ltd is concentrating on the worldwide Placement equipment market.
Our firm is a large-conclude model manufacturer of automated AOI visual inspection products and a global provider of CZPT accessories, which integrates R & D, manufacturing, income, and service. The firm’s R & D crew is composed of abroad and domestic senior Eyesight technical specialists, has a lot of a long time of R & D and producing experience in the AOI visual inspection gear sector, and the core technology has acquired a amount of invention and software patents. At the same time, it also operates different makes of CZPT total-line tools leasing business, CZPT upkeep enterprise, CZPT components business.

Our Rewards

1. Brand reliable ensure
2. Customization is suitable
3. Expert technical and sales crew
4. Full SMT brand and solution assistance
five. In excess of 15 many years expertise, good quality assure.
six. Complete assortment of items, enough stock, and quickly delivery time

Brand Associate

FAQ

1. What goods can you supply? 
Placement Equipment Feeder, CZPT Placement Machine, CZPT AOI, CZPT SPI, CZPT Stencil Printer, CZPT Reflow Oven, CZPT X-Ray, CZPT Feeder, CZPT Nozzle, LED Decide & Location Equipment, Wave Soldering Machine, CZPT Coating Device, CZPT Cleansing Machine, CZPT Label Mounter, PCB Cutting Device, PCB Laser Printer Equipment, PCB Handling Machine, CZPT Mounter Income: Placement Equipment, Placement Equipment Add-ons, CZPT Accessories.

two. Can I get a sample? what is your MOQ?
Yes, the sample is available, our MOQ is 1 piece 

3. How long will it just take to produce the items?
About 1 to 7 functioning times. 

4. What kinds of makes of areas can you provide? 
We have Fuji, Juki, Yamaha, Samsung, Panasonic, Siemens, Universal, Hitachi, and many others.

5. What is the guarantee of CZPT equipment components?
We provide 6 months guarantee on new accessories and 3 months on 2nd components, true daily life depends on functioning and routine maintenance. If it can not perform after freshly received, free of charge substitute would be sent immediately or refund

Following Revenue Services

24 hrs on the internet, rapid reaction, guaranteed warranty for you!

For far more data, make sure you go to our Official internet site

###

###

###

###

###

###

###

###

Three basic types of pulleys, their applications and ideal mechanical advantages

There are three basic types of pulleys: movable, fixed and compound. Each has its advantages and disadvantages, and you should be able to judge which type is best for your needs by looking at the table below. Once you have mastered the different types of pulleys, you can choose the right pulley for your next project. Now that you have mastered the three basic types, it is time to understand their applications and ideal mechanical advantages.

describe

The stress characteristics of a pulley depend on its size and construction. These stresses are derived by comparing the stress characteristics of different pulley designs. Stress criteria include static and fatigue strength analyses and specify maximum stress ranges. Stresses are calculated in a 3D stress field, including radial, tangential and axial stresses. The stress characteristics of pulleys are critical to the design and manufacture of industrial machines.
The principal stresses on the pulley shell are distributed in the tangential and hoop directions, close to the centerline of the pulley. If the pulley has a wide face, the axial stress occurring near the shell/disk junction can be large. The stress distribution was determined using British Standard BS5400 Part 10: Stresses at the shell and end disc connections for infinite fatigue life.
Another type of composite is a pulley with a belt section. Such structures are well known in the art. The corresponding help chapters for these elements contain detailed descriptions of the internal structure of these components. Chamfers between pulleys can also be defined using multiple tapers, with a smaller taper extending from midpoint 44 to large diameter 42. Additionally, the pulley can have multiple taper angles, and as the pulley moves away, the taper angle is from the center.

type

A pulley system uses a rope to move the object and one side of the rope to lift the load. The load is attached to one end of the pulley, while the other end can move freely in space. The force applied to the free end of the rope pulls the load up or down. Because of this, the mechanical advantage of the movable pulley is two to one. The greater the force applied to the free end of the rope, the greater the amount of movement achieved.
There are three common types of pulleys. The cast-iron variety has a rim at the front and a hub at the back. The arms of the pulley can be straight or curved. When the arms contract and yield instead of breaking, they are in tension. The top of the pulley centers the belt in motion and is available in widths ranging from 9mm to 300mm.
The rope, hub and axle are mounted on the pulley. They are common and versatile mechanical devices that make it easier to move or lift objects. Some pulleys change the direction of the force. Others change the magnitude. All types of pulleys can be used for a variety of different applications. Here are some examples. If you’re not sure which type to choose, you can find more resources online.

application

The applications for pulleys are almost limitless. This simple machine turns complex tasks into simple ones. They consist of a rope or chain wrapped around a wheel or axle. Using ropes, one can lift heavy objects without the enormous physical exertion of traditional lifting equipment. Some pulleys are equipped with rollers, which greatly magnifies the lifting force.
When used properly, the pulley system can change the direction of the applied force. It provides a mechanical advantage and allows the operator to remain separate from heavy objects. They are also inexpensive, easy to assemble, and require little lubrication after installation. Also, once installed, the pulley system requires little maintenance. They can even be used effortlessly. Despite having many moving parts, pulley systems do not require lubrication, making them a cost-effective alternative to mechanical lifts.
Pulleys are used in many applications including adjustable clotheslines in different machines, kitchen drawers and motor pulleys. Commercial users of pulley systems include cranes. These machines use a pulley system to lift and place heavy objects. They are also used by high-rise building washing companies. They can easily move a building without compromising its structural integrity. As a result, many industries rely on technology to make elevators easier.

Ideal mechanical advantage

The ideal mechanical advantage of a pulley system is the result of rope tension. The load is pulled to the center of the pulley, but the force is evenly distributed over the cable. Two pulleys will provide the mechanical advantage of two pulleys. The total energy used will remain the same. If multiple pulleys are used, friction between pulleys and pulleys reduces the return of energy.
Lever-based machines are simple devices that can work. These include levers, wheels and axles, screws, wedges and ramps. Their ability to work depends on their efficiency and mechanical superiority. The ideal mechanical advantage assumes perfect efficiency, while the actual mechanical advantage takes friction into account. The distance traveled by the load and the force applied are also factors in determining the ideal mechanical advantage of the pulley.
A simple pulley system has an MA of two. The weight attached to one end of the rope is called FA. Force FE and load FL are connected to the other end of the rope. The distance that the lifter pulls the rope must be twice or half the force required to lift the weight. The same goes for side-by-side pulley systems.

Materials used in manufacturing

While aluminum and plastic are the most common materials for making pulleys, there are other materials to choose from for your timing pulleys. Despite their different physical properties, they all offer similar benefits. Aluminum is dense and corrosion-resistant, and plastic is lightweight and durable. Stainless steel is resistant to stains and rust, but is expensive to maintain. For this reason, aluminum is a popular choice for heavy duty pulleys.
Metal can also be used to make pulleys. Aluminum pulleys are lightweight and strong, while other materials are not as durable. CZPT produces aluminium pulleys, but can also produce other materials or special finishes. The list below is just representative of some common materials and finishes. Many different materials are used, so you should discuss the best options for your application with your engineer.
Metals such as steel and aluminum are commonly used to make pulleys. These materials are relatively light and have a low coefficient of friction. Steel pulleys are also more durable than aluminum pulleys. For heavier applications, steel and aluminum are preferred, but consider weight limitations when selecting materials. For example, metal pulleys can be used in electric motors to transmit belt motion.

cost

Replacing a tensioner in a car’s engine can cost anywhere from $90 to $300, depending on the make and model of the car. Cost can also be affected by the complexity of the pulley system and how many pulleys are required. Replacement costs may also increase depending on the severity of the damage. The cost of replacing pulleys also varies from car to car, as different manufacturers use different engines and drivetrains.
Induction motors have been an industrial workhorse for 130 years, but their cost is growing. As energy costs rise and the cost of ownership increases, these motors will only get more expensive. New technologies are now available to increase efficiency, reduce costs and improve safety standards.
The average job cost to replace an idler varies from $125 to $321, including labor. Parts and labor to replace a car pulley can range from $30 to $178. Labor and parts can cost an additional $10 to $40, depending on the make and model of the car. But the labor is worth the money because these pulleys are a critical part of a car’s engine.

editor by czh 2022-12-02