China Iron Mining Magnetite Preconcentration Self-Cleaning Permanent Magnetic Head Pulley pulley and belt

Solution Description

Iron Mining Magnetite Preconcentration Self-Cleansing Permanent Magnetic Head Pulley

Functioning Basic principle
The head pulley magnet named as head pulley magnet or dry drum long term magnetic separator also, is a self cleaning magnet which eliminates overseas tramp ferrous metals from bulk components on a belt conveyor or separate the non-magnetic materials out of magnetic components on a belt conveyor.  The magnetic area adheres magnetic materials to the belt as all components passes in excess of the head pulley. The magnetic components from the underflow can be securely captured together.

Functions
Big magnetic envelope angle design and style, magnetic envelope angle considerably less than one hundred eighty levels, improve the duration of the separation area and the variety of magnetic inversion, accomplish the efficient separation of magnetic supplies and non (weak) magnetic resources.
Neodymium-iron-boron magnets are utilized in all magnetic techniques to guarantee higher magnetic discipline intensity and big depth of action.
The demagnetization fee of magnetic area intensity is considerably less than 5% following 8 several years.
The magnetic method is protected by stainless steel plate to make sure that the magnetic block does not drop off.
The shell of the pulley is produced of stainless steel and lined with dress in-resistant rubber outside, which has a long support lifestyle.
When it is utilized as the driving pulley of the belt conveyor, the length of the conveyor must be considerably less than 100 meters.

Software
It is utilised for dry pre-focus of magnetite ores with dimension less than three hundred mm just before grinding. Generally it can reject some gangues to boost the iron quality ahead of grinding.

Technical Parameters
Tiny and Medium Size

Model Drum Dia.
(mm)
Drum Len.
(mm)
Belt Width
(mm)
B of Drum Surface area
(mT)
Capability
(t/h)
Feed Measurement
(mm)
CTDG-fifty/fifty 500 600 five hundred 160-350 50-80 <50
CTDG-fifty/65 500 750 650 a hundred and sixty-350 sixty-110 <50
CTDG-sixty three/sixty five 630 750 650 a hundred and sixty-four hundred 70-120 <50
CTDG-50/eighty 500 950 800 a hundred and sixty-four hundred 70-150 <50
CTDG-sixty three/80 630 950 800 180-five hundred one hundred-a hundred and sixty <150
CTDG-eighty/80 800 950 800 a hundred and eighty-five hundred 120-200 <150
CTDG-63/100 630 1150 one thousand 180-500 130-one hundred eighty <150
CTDG-eighty/100 800 1150 one thousand 180-five hundred a hundred and fifty-260 <150
CTDG-one hundred/a hundred a thousand 1150 1000 a hundred and eighty-five hundred a hundred and eighty-300 <250

Large Dimension

Product Drum Dia.
(mm)
Drum Len.
(mm)
Belt Width
(mm)
B of Drum Area
(mT)
Capacity
(t/h)
Feed Measurement
(mm)
CTDG-63/a hundred and twenty 630 1400 1200 a hundred and eighty-five hundred a hundred and fifty-240 <150
CTDG-eighty/120 800 1400 1200 180-500 a hundred and eighty-350 <150
CTDG-one hundred/a hundred and twenty a thousand 1400 1200 a hundred and eighty-five hundred 200-four hundred <250
CTDG-a hundred and twenty/a hundred and twenty 1200 1400 1200 a hundred and eighty-five hundred 220-450 <250
CTDG-eighty/a hundred and forty 800 1600 1400 one hundred eighty-500 240-four hundred <250
CTDG-one hundred/a hundred and forty 1000 1600 1400 180-five hundred 260-450 <250
CTDG-one hundred twenty/a hundred and forty 1200 1600 1400 one hundred eighty-five hundred 280-five hundred <300
CTDG-a hundred and forty/140 1400 1600 1400 a hundred and eighty-five hundred 300-550 <300

one. What is the principal organization scope of your organization?
HZE is a organization with R&D middle, style institute, producing factories, installation and commissioning teams. Our customers are in the mining and mineral processing fields. Our main businesses include mineral processing EPC (engineering, procurement and construction), venture consultation, engineering design and style, mineral processing equipment manufacturing, on-website set up, commissioning, workers coaching, buyer project procedure administration, spare parts provide and specialized support. Consumers are totally free to select any 1 or any mix of our solutions.


two. What are the fantastic rewards of your company?

The one particular-end service of mineral processing engineering undertaking and tools is our main competitiveness.
The most important attribute that CZPT distinguishes alone from other engineering firms, design and style companies or consulting organizations is that we are also an products producer with a production plant of 50,000 sq. meters, and we have total production rout and the connected equipment.
HZE distinguishes by itself from other tools manufacturers by possessing its personal R&D centre and engineering style institute.
HZE distinguishes itself from many mining machinery enterprises by possessing an expert team with members including not only senior engineers of the company, but also prime Chinese technological authorities, university professors and researchers.


3. What are the characteristics of your firm’s 3D style?

HZE not only utilizes 3D software program to style tools, but also employs 3D application to design and style approach flow, pipeline, metal structure, auxiliary services, and many others. of the whole mineral processing task. We even use 3D design and style for tools packaging, container packing and products directions guide. This greatly improves the top quality of tools and engineering, shortens the design period, facilitates specialized dialogue and analysis, facilitates venture administration, enhances development security and reduces project expense.

4.  What are the services characteristics of your organization?

  1. Clients who whether buy our gear, or entrust us with EPC, or call for us to supply a certain services, cooperate closely with us to carry out specific operations and supervise our implementation all through the approach.
  2. HZE will try out to realize the standard circumstance and needs of customers as thorough as feasible ahead of the sale, formulate a preliminary prepare according to the certain situation of buyers, and get unanimous views right after communications and conversations with consumers to determine the program.
  3. We established up customer information for each client who signed the deal with us and add them to the Cloud the place clients can also get an account and password. Consumers can have all the paperwork, videos and images, technologies, providers, execution, operation, management and manage, routine maintenance and so on relevant to the enterprise.
  4. Regardless of whether it is in the procedure of standard contracting, gear production or delivering some kind of service, we welcome consumers to know about our implementation on the spot or through the community, and set forward requirements and views.
  5. We support end users who have employed our goods to formulate procedure specifications and make suggestions on servicing programs and spare parts inventories. In addition to routine on-web site installation, commissioning and education, during the creation time period soon after we handing above gear to consumers for use, we typically recognize the tools using scenarios via the community and provide assistance and training to customer management and operators.
  6. For the clients who have just start off the mining company, we provide the opportunity of training and practice in China’s mines for the clients’ staff, till they are competent in operation and servicing.

 

US $1,000-10,000
/ set
|
1 set

(Min. Order)

###

Material: Neodymium-Iron-Boron
Magnetic Pole: Permanent Magnet
Magnetic Induction Intensity: 160-500 Mt
Feed Particle Size: <300mm
Diameter: 500, 630, 800, 1000mm
Capacity: 150-550t/H

###

Samples:
US$ 3000/set
1 set(Min.Order)

|
Request Sample

###

Customization:

###

Model Drum Dia.
(mm)
Drum Len.
(mm)
Belt Width
(mm)
B of Drum Surface
(mT)
Capacity
(t/h)
Feed Size
(mm)
CTDG-50/50 500 600 500 160-350 50-80 <50
CTDG-50/65 500 750 650 160-350 60-110 <50
CTDG-63/65 630 750 650 160-400 70-120 <50
CTDG-50/80 500 950 800 160-400 70-150 <50
CTDG-63/80 630 950 800 180-500 100-160 <150
CTDG-80/80 800 950 800 180-500 120-200 <150
CTDG-63/100 630 1150 1000 180-500 130-180 <150
CTDG-80/100 800 1150 1000 180-500 150-260 <150
CTDG-100/100 1000 1150 1000 180-500 180-300 <250

###

Model Drum Dia.
(mm)
Drum Len.
(mm)
Belt Width
(mm)
B of Drum Surface
(mT)
Capacity
(t/h)
Feed Size
(mm)
CTDG-63/120 630 1400 1200 180-500 150-240 <150
CTDG-80/120 800 1400 1200 180-500 180-350 <150
CTDG-100/120 1000 1400 1200 180-500 200-400 <250
CTDG-120/120 1200 1400 1200 180-500 220-450 <250
CTDG-80/140 800 1600 1400 180-500 240-400 <250
CTDG-100/140 1000 1600 1400 180-500 260-450 <250
CTDG-120/140 1200 1600 1400 180-500 280-500 <300
CTDG-140/140 1400 1600 1400 180-500 300-550 <300
US $1,000-10,000
/ set
|
1 set

(Min. Order)

###

Material: Neodymium-Iron-Boron
Magnetic Pole: Permanent Magnet
Magnetic Induction Intensity: 160-500 Mt
Feed Particle Size: <300mm
Diameter: 500, 630, 800, 1000mm
Capacity: 150-550t/H

###

Samples:
US$ 3000/set
1 set(Min.Order)

|
Request Sample

###

Customization:

###

Model Drum Dia.
(mm)
Drum Len.
(mm)
Belt Width
(mm)
B of Drum Surface
(mT)
Capacity
(t/h)
Feed Size
(mm)
CTDG-50/50 500 600 500 160-350 50-80 <50
CTDG-50/65 500 750 650 160-350 60-110 <50
CTDG-63/65 630 750 650 160-400 70-120 <50
CTDG-50/80 500 950 800 160-400 70-150 <50
CTDG-63/80 630 950 800 180-500 100-160 <150
CTDG-80/80 800 950 800 180-500 120-200 <150
CTDG-63/100 630 1150 1000 180-500 130-180 <150
CTDG-80/100 800 1150 1000 180-500 150-260 <150
CTDG-100/100 1000 1150 1000 180-500 180-300 <250

###

Model Drum Dia.
(mm)
Drum Len.
(mm)
Belt Width
(mm)
B of Drum Surface
(mT)
Capacity
(t/h)
Feed Size
(mm)
CTDG-63/120 630 1400 1200 180-500 150-240 <150
CTDG-80/120 800 1400 1200 180-500 180-350 <150
CTDG-100/120 1000 1400 1200 180-500 200-400 <250
CTDG-120/120 1200 1400 1200 180-500 220-450 <250
CTDG-80/140 800 1600 1400 180-500 240-400 <250
CTDG-100/140 1000 1600 1400 180-500 260-450 <250
CTDG-120/140 1200 1600 1400 180-500 280-500 <300
CTDG-140/140 1400 1600 1400 180-500 300-550 <300

Calculate the ideal mechanical advantage of pulleys

The basic equations for pulleys can be found in this article. It will also cover the different types of pulleys, the ideal mechanical advantages of pulleys, and some common uses of pulley systems. Read on to learn more! After all, a pulley is a simple mechanical device that changes the direction of a force. Learn more about pulleys and their common uses in engineering.
pulley

pulley basic equation

Pulleys work the same way as gravity, so they should withstand similar forces. Newton’s laws of motion can be used to calculate the forces in a pulley system. The second law of motion applies to forces and accelerations. Similar to this is Newton’s third law, which states that the directions of forces are equal and opposite. The fourth law dictates the direction of force. The Fifth Law states that tension is in equilibrium with gravity.
A pulley is a simple mechanism that transmits force by changing direction. They are generally considered to have negligible mass and friction, but this is only an approximation. Pulleys have different uses, from sailboats to farms and large construction cranes. In fact, they are the most versatile mechanisms in any system. Some of their most common applications and equations are listed below.
For example, consider two masses m. Those of mass m will be connected by pulleys. The static friction coefficient of the left stop is ms1, and the static friction coefficient of the right stop is ms2. A no-slip equation will contain multiple inequalities. If the two blocks are considered to be connected by a pulley, the coefficient of kinetic friction is mk. In other words, the weight of each block carries the same mass, but in the opposite direction.

Types of pulleys

A pulley is a device used to pull and push objects. Pulley systems are ropes, cables, belts or chains. The “drive pulley” is attached to the shaft and moves the driven pulley. They are available in a variety of sizes, and the larger they are, the higher the speed of power transmission. Alternatively, use small pulleys for smaller applications.
Two-wheel pulleys have two mechanical advantages. The greater the mechanical advantage, the less force is required to move the object. More wheels lift more weight, but smaller pulleys require less force. In a two-wheel pulley system, the rope is wound around two axles and a fixed surface. As you pull on the rope, the shafts above slowly come together.
Compound pulleys have two or more rope segments that are pulled up on the load. The mechanical advantage of compound pulleys depends on the number of rope segments and how they are arranged. This type of pulley can increase the force by changing the direction of the rope segment. There are two main types of pulleys. Composite pulleys are most commonly used in construction. The ideal mechanical advantage of pulleys is 2 or more.
Construction pulleys are a basic type. They are usually attached to wheel rails and can be lifted to great heights. Combinations of axes are also common. Construction pulleys can be raised to great heights to access materials or equipment. When used in construction, these pulleys are usually made of heavy materials such as wood or metal. They are secured with ropes or chains.

The ideal mechanical advantage of pulleys

The pulley system is a highly complex system with high mechanical advantages. Use a single pulley system to reduce the force required to lift an object by cutting it in half. The mechanical advantage increases as you add more pulleys, such as six or seven. To calculate the mechanical advantage of a pulley system, you need to count the number of rope segments between the pulleys. If the free end of the rope is facing down, don’t count it. If it’s facing up, count. Once you have your number, add it up.
The required mechanical advantage of a pulley is the number of rope segments it has to pull the load. The more rope segments, the lower the force. Therefore, the more rope segments the pulley has, the lower the force. If the rope segments are four, then the ideal mechanical advantage is four. In this case, the composite pulley quadrupled the load force.
The ideal mechanical advantage of a pulley system is the sum of the mechanical force and the force required to lift the load at its output. Typically, a single pulley system uses two ropes, and the mechanical force required to lift the load is multiplied by the two ropes. For a multi-pulley system, the number of ropes will vary, but the total energy requirement will remain the same. The friction between the rope and pulley increases the force and energy required to lift the load, so the mechanical advantage diminishes over time.
pulley

Common uses of pulley systems

A pulley system is a simple mechanical device typically used to lift heavy objects. It consists of a rotating wheel attached to a fixed shaft and a rope attached to it. When the wheel moves, the force applied by the operator is multiplied by the speed of the pulley, and the force is multiplied by the weight of the object being lifted. Common uses for pulley systems include pulling, lifting, and moving heavy objects.
The oil and petroleum industries use pulley systems in a variety of applications. Most commonly, pulleys are used in drilling operations and they are installed on top of the rig to guide the cable. The cable itself is attached to two pulleys suspended in the derrick, where they provide mechanical energy to the cable. Using a pulley system in this application provides the force needed to move the cable safely and smoothly.
The main advantage of the pulley system is that it minimizes the force required to lift an object. The force used to lift the object is multiplied by the desired mechanical advantage. The more rope segments, the lower the force required. On the other hand, a compound pulley system can have many segments. Therefore, a compound pulley system can increase the force a worker can exert on an object.
Safety Precautions to Take When Working on Pulley Systems

There are many safety precautions that should be observed when working on a pulley system. The first is to wear proper protective gear. This includes hard hats that protect you from falling objects. Also, gloves may be required. You should limit the amount of movement in the penalty area, and you should also keep the area free of unnecessary people and objects. Also, remember to wear a hard hat when working on the pulley system.
Another important safety precaution when working on a pulley system is to check the Safe Working Load (SWL) of the pulley before attaching anything. This will help you understand the maximum weight the pulley can hold. Also, consider the angle and height of the pulley system. Always use safety anchors and always remember to wear a hat when working on a pulley system.
Safe use of chain hoists requires training and experience. It is important to read the manufacturer’s manual and follow all safety precautions. If you’re not sure, you can actually inspect the hoist and look for signs of damage or tampering. Look for certifications for sprocket sets and other lifting accessories. Look for the Safe Working Load (SWL) marking on the chain hoist.
pulley

Example of a pulley system

Pulley systems are often used to lift items. It allows you to reduce the effort to lift and move the load by applying force in one direction. Pulley systems can be built and modeled to fit any type of project. This resource focuses on pulley systems and is designed to support the new GCSEs in Engineering, Design and Technology. There are also many examples of pulley systems suitable for various applications.
In the study, participants who read easy text took longer to manipulate the pulley system than those who read challenging text. In general, this suggests that participants with prior scientific experience used their cognitive abilities more effectively. Additionally, students who read simple texts spent less time planning the pulley system and more time on other tasks. However, the study did show that the time required to plan the pulley system was similar between the two groups.
In everyday life, pulley systems are used to lift various objects. Flagpoles are one of many pulley systems used to raise and lower flagpoles. They can also be used to raise and lower garage doors. Likewise, rock climbers use pulleys to help them ascend and descend. The pulley system can also be used to extend the ladder.

China Iron Mining Magnetite Preconcentration Self-Cleaning Permanent Magnetic Head Pulley     pulley and belt	China Iron Mining Magnetite Preconcentration Self-Cleaning Permanent Magnetic Head Pulley     pulley and belt
editor by czh 2023-01-30